Sununion International Trade Company - 山东三盟国际贸易有限公司

Galvanized sheet

timg (1)timg (2)timg (3)

Construction projects: Generally, the most common use for sheet metal is for commercial construction projects. However, galvanized sheet metal-specific uses include:

· Awnings  · Balconies  · Building frames  · Canopies  · Ductwork  · Handrails  · Fences  · Industrial walkways  · Ladders  · Staircases  · Street Furniture  · Support Beams  · Verandas

Electronics: Computer casings and precision instruments are made with zinc coating because it’s moisture- and rust-resistant.
Nails, nuts, and bolts: Unfortunately, the hot-dip coating process provides too much fill in the threads of nuts and bolts that are ⅜-inches or smaller, which can reduce the strength. 
Instead, electro-galvanizing (which involves electroplating, a process where a current of electricity is run through a saline/zinc solution with a zinc anode and steel conductor) and stainless steel are used. These electro-galvanized nuts and bolts go into light mechanical products, like cars and bicycles.
Piping: Galvanized piping replaced cast iron and lead in cold-water plumbing in the early 20th century. The life expectancy of galvanized plumbing is about 70 years, depending on the region’s impurities in the water supply, proximity to electrical grids, thickness of zinc, and whether the piping was coated on the inside and outside. 
To increase the longevity, some galvanized piping were lined with epoxy resin, which is a petroleum-derived material known for its excellent adhesion, chemical and heat resistance, and insulation properties.
After World War II, galvanized pipes were replaced by copper and plastic piping for interior water drinking service in homes, schools, and similar locations. However, galvanized steel pipes are still used for outdoor applications that require the metal’s superior mechanical strength, especially in poor weather.
Playground equipment: Childrens’ play equipment like bicycle racks, jungle gyms, and swingsets are made with galvanized steel because it’s rust-resistant.
Transportation: Cars and aircrafts are large consumers of galvanized steel, as the industries use it for:

· Hoods  · Fenders  · Oil pans  · Parking brakes  · Roofing  · Seating  · Spring housing

Wire rope: Because wire rope is a highly stressed product, the hot-dip coating process can reduce the strength of the steel on a measurable scale due to hydrogen embrittlement. This is when the steel becomes brittle due to the introduction and subsequent diffusion of hydrogen into the metal. 
To solve this problem, stainless steel is used for products, such as electric cables, construction binding materials, window locks, and more. 

In short, zinc is resistant to corrosion, moisture, rust, and scratches. It protects the metals during transportation, installation, and service (which isn’t required often due to the self-healing abilities of galvanization). From playgrounds and laptops to car and airplanes, these projects would be nothing without hot-dip galvanizing.